Baker boiler for a steam car2/19/2021 I started work on building a model of the Baker boiler. I have had some plans for several years, but was reluctant to start as some photos I had were different then the drawings. I am not sure if they were all built the same. The Patent drawings show a cleanout system to blow the tubes inside the drum and the only construction drawing shows no system on the top of the drum, just a welded top plate. I know there are about three Stanley’s running and using a Baker boiler but I have seen none without the casing on. Have you seen one striped down? Or do you have any photos of one striped down with no casing. Rolly Evans
1 Comment
Johan van Doesburg
11/15/2022 01:12:42 am
Hi Rolly, I recently purchased a Stanley 735 which has (much to our surprise I must admit) a Baker boiler. We do not have it stripped down yet as time is scarce, but we are certainly curious if it still in working order. Do you have any information, drawings or blueprints of this boiler ? Leave a Reply. |
For instructions on how to add to our community's blog post, please visit our Get Involved page by clicking on the link above!
Archives
November 2022
Categories
All
|
RSS Feed
|
|
Steam Car Network functions as a resource for all steam car and steam bike enthusiasts. The website is constantly updated with articles, events, and informative posts to keep the community alive and growing. Feel free to contact us if you have any questions or concerns at the email address below and we will promptly reply.
[email protected] |
|