stanley steam car challenge6/22/2020 Simon Webb· I was nominated to do a ten day steam engine challenge Every day I will select an image from a day in the life of steam engine or a proud moment as a steam engine owner. Then I will post it without any explanation and nominate someone to take up the challenge.
0 Comments
stanley steam car parking break design6/22/2020 Re: 1908 Stanley hand brake Hear are a few drawing of how I built the emergency brake locking hardware. My 1906 did not have this hardware, but I added outside brakes drums and copied the hardware from a 1907 car. I also added a brake light and brake switch. Rolly   two stanley model r6/14/2020 Steve Baldock passed away on the 1st of November 2018 Shortly after completing the recreation of two Model R Stanley’s. These are some photos of the Model-R Steve built from scratch. He followed my work on my building my EX and E-mailed me often. He did complete 3D cad drawings of every part. Instead of castings most of the parts were machined in steel on a CNC Bridgeport Mill pre 1985 He advised me programs on how to go from Cad drawing to G code and then edit the G code to match my machine. Rolly |
For instructions on how to add to our community's blog post, please visit our Get Involved page by clicking on the link above!
Archives
November 2022
Categories
All
|
RSS Feed
|
|
Steam Car Network functions as a resource for all steam car and steam bike enthusiasts. The website is constantly updated with articles, events, and informative posts to keep the community alive and growing. Feel free to contact us if you have any questions or concerns at the email address below and we will promptly reply.
[email protected] |
|