January 14th, 20151/14/2015 So we started then, now we need to figure out where everything will be located.
The body underwent an extensive renovation in the late 80s, but then put the project on ice. So now we will then 25 years later to take up the restoration again, it will require a lot of research to all will be right. Next to the picture seen air pump that will keep the fuel pressure. Behind the wooden beam is visible feed water pump and a loose oil pump which, over time, the pump cylinder oil in the steam just before the machine. At the top of the picture is seen the hand pump to feed water, it is used mainly in uppeldning.
0 Comments
Leave a Reply. |
About GunnarI am a self-taught steam car engineer whose interest is in the renovation, repairs and manufacturing of steam car parts.... Archives
July 2019
Categories |